AS Series OwnerOs Manual 9/11/98 12:51 PM Page 6
New Construction
31-1/2"
31-1/2"31-1/2"
Step One:Step Two:Step Three:
Remove the grille from theDetermine the correct speakerAttach the proper mounting
speaker frame.location.brackets, marked and preset at
3/8", 1/2", 5/8", and 3/4", corre-
sponding to the thickness of
the dry wall, to the speaker
frame.
Step Four:
Nail or screw the speaker-frame
assembly to the wall studs and
route the wires through the
frame opening.
After the Drywall is Installed
Step Five:Step Six:Step Seven:
Cut the drywall.Connect the speaker wires toReplace the metal grille.
the baffle assembly and install
baffle assembly in frame. Do
not overtighten the baffle
screws. |